This website is an archived copy of "Chris's Acorns", now hosted by The Centre for Computing History as part of The Chris Whytehead collection.
To view the page in it's original forms without this header, append "?cfch-archive=orig" to the URL.

  I-cubed EtherLan 200 and 10base2 MAU

[Back

 i3 EtherLan 200 top

i-cubed EtherLan 200 (top) 

 i3 EtherLan 200 bottom

i-cubed EtherLan 200 (bottom)  

These two pictures show the EtherLan 200 which fits in an A3000 behind the serial port. A Media Attachement Unit (MAU) is conected externally to the serial port to complete the connection. The EtherLan 200 uses the EtherH 8 bit driver.

 i3 EtherLan200 MAU

i-cubed EtherLAan200 10Base2 MAU

i3 EtherLan 200 MAU open 

i-cubed EtherLan 200 10Base2 MAU open

i3 EtherLan 200 MAU computer end 

i-cubed EtherLan 200 10Base2 MAU Computer end

 i3 EtherLan 200 MAU BNC connector

i-cubed EtherLan 200 10Base2 MAU network end

This EtherLan 200 MAU is a 1st generation MAU for the EtherLAN 200 Ethernet interface. There was also a 10BaseT MAU with an RJ45 connection. The computer end plugs into the A3000 serial port and the 2 screws visible in the computer end lock it in place. The network end is connected to a BNC plug on the end of a coax network cable.

i3 EtherLan 200 MAU top

 i-cubed EtherLan 200 MAU (top)

i3 EtherLan 200 MAU Computer end

 i-cubed EtherLan 200 MAU computer end

i3 EtherLan 200 MAU network end

i-cubed EtherLan 200 MAU Network end

A later, much smaller MAUs that looks a bit like a gender changer connector. The computer end plugs into the A3000 serial port and the 2 screws visible in the computer end lock it in place. The network end is connected to a BNC plug on the end of a coax network cable